Fillable Printable Research Proposal Template
Fillable Printable Research Proposal Template
Research Proposal Template
THE RESEARCH PROPOSAL
Lesson Objectives
The student will be able to:
1. List and describe the chapters and subsections of a research proposal and a research report
and their proper order.
2. Describe the characteristics of an appropriate proposal title.
3. Compare and contrast the styles appropriate for (1) a dissertation or thesis, (2) a research
proposal, (3) a research report, (4) a professional paper, and (5) a journal article.
4. Distinguish (compare and contrast) between assumptions, limitations and hypotheses.
RESEARCH PROPOSAL OUTLINE
Cover Page
Table of Contents
Chapter 1 - Introduction
(Need for the Study, Justification)
Problem Statement
Objectives/Research Questions/Hypotheses
Definition of Terms
Limitations of the Study
Basic Assumptions
Chapter 2 - Review of Literature
(Can have sections deemed necessary)
Chapter 3 - Procedures
Research Design
Subject Selection
Outcome Measures
Conditions of Testing
Treatments
Data Analysis
*plus
** Chapter 4 presentation should follow the same sequence and topics as that presented in
Chapter 3. **
Chapter 4 - Results
Findings Relative to problem
Summary of Data
Tests of Significance
Chapter 5 - Discussion
*Bibliography
Appendices
1
ELEMENTS OF RESEARCH PROPOSAL
Cover Page
Follow the style prescribed by the style manual suggested by the university, department or
adviser.
Title - Should contain key words or phrases to give a clear and concise description of the
scope and nature of the report, and key words should allow bibliographers to index
the study in proper categories (Van Dalen, 1979:406).
- Indicate major variables
- Indicate nature of research
* descriptive
* correlational
* experimental
- Indicate target population
- Avoid words like:
"A Study of........”
"An Investigation of ........”
"A Survey of ........”
- Example dissertation title:
"A Process for Determining Vocational Competencies for the Performance of
Essential Activities for the Sales Function by Sales Personnel in the Feed
Industry and the Loci in Which the Competencies Could Be Taught.”
Journal article title for the above:
"What Does It Take To Sell Feed?”
Table of Contents
Follow appropriate style
Gives bird’s-eye view of dissertation or thesis
Not "generally” provided in reports, papers or articles
Chapter 1 - Introduction
Background and Setting
- Provide reader with necessary background and setting to put the problem in proper
context.
- Lets the reader see the basis for the study.
- Justifies and convinces the reader that the study is needed.
- Be factual--statements, opinions and points of view should be documented.
- Provide a logical lead-in to a clear and concise statement of the problem.
- Your "sales pitch.”
- In a proposal for funding, address capabilities and capacity of individuals and
agency/institution in this section.
Statement of the Problem
Characteristics of properly stated problems will be discussed; see notes. Clearly
describe the problem to be researched.
Objectives of the Study
- See notes on "Objectives and Hypothesis” for details
2
- Best located after the statement of the problem in descriptive research
- Indicates the data to be collected
- Make clear the direct connection between specific objectives and hypotheses and related
literature and theory
- Controversial as to whether or not null hypotheses go here or in Chapter 4. Rely upon
wishes of adviser and committee, if a thesis or dissertation.
- If a study is descriptive, objectives or research questions can be used here.
- If the study is ex post facto or experimental, hypotheses must be used.
Definition of Terms
- Define terms in the context where they will be used - provide operational definitions as
well as constitutive definitions.
- Include a list of definitions for terms and concepts that have significant meaning for the
study.
- Constructed in listing form - like a dictionary, not prose form
- Do not define generally understood concepts, principles and concerns, e.g., vocational
education, secondary education, adult education.
- Much of the specific information about the terms will be presented in other appropriate
sections of the proposal
Limitations of the Study
- Summarize limitations brought about by the procedures of the study
- Describe the procedural limitations in detail in the appropriate section; just summarize
here
Basic Assumptions
- Do not make assumptions about procedures (or hypotheses)
- Accepted without thought of immediate proof
- Propositions for which no information can be made available within the scope of the
study
- Are axiomatic in that they are propositions that virtually every reasonable person is ready
to adopt but which cannot be proven.
- Type of assumption most commonly stated explicitly is one that is limited in its nature
and serves to hold the size or scope of an investigation within its prescribed boundaries
(puts parameters around the study), e.g., study will deal with secondary students not
post-secondary
- Usually made when the argument rests on a priori reasoning, but can be made on basis of
present knowledge on research which is as yet incomplete (Specific qualifications must
be made in the conclusions of the research report in which assumptions are made.)
- Ought to be clearly stated
- Protects researcher, e.g., keeps someone from saying, "Oh, I thought you were studying
XYZ, too.”
- Assumptions are not hypotheses
- Hypotheses are propositions to be investigated and are the very subject of the problem;
so, do not make assumptions about them.
Significance of the Problem
- These arguments can be presented in the "Background and Setting” section. This does
not need to be a special section.
- Knowledge relating to the theory that .......
- New products, e.g., instrument, instructional material, etc.
- Who (what individuals or groups) can use this new knowledge or information yielded by
3
the research to change or improve the present situation? How will the study contribute to
the improvement of the profession?
- Indicate how the results can be generalized beyond the bounds of study
- Can use the arguments of others (expert opinion) who call for an investigation of the
problem (properly documented, of course).
- Can use conflict in findings of related research as justification for the study. Be sure it is
documented in Review of Literature.
- Use if, then (hypothetical-deductive) logic
Chapter 2 - Review of Literature
A. Provides tentative solutions to the problem or tentative answers to the questions. (Could
be publishable)
B. Indicates the theory on which the study is based; critique and weigh studies as theory is
built. (Teeter-totter example)
C. Provides the rationale for the hypotheses and variables therein
D. Organized and written in reference to the specific objectives of the study
E. Proposals generally do not include as a complete review as does the report.
F. Consists of two phases
1. Problem exploration - definition stage
* Conducted before proposal preparation to identify problem
* Provides dimensions and limits of the problem area
* Defines extent to which solution or answer is already known
* Helps discern "What do we know the least about?”
* Identifies possible procedures (design, instruments; analyses) for conducting the
study
2. Proposal Writing - See A-E above
G. Reporting Related Literature will follow in the course
Chapter 3 - Procedures
(Some writers call this chapter "Methodology”)
REPLICATION is the key word to keep in mind when writing this chapter. Researchers must
provide accurate, detailed descriptions of how the research was done so it could be replicated
(redone) by others. You should provide explanations that will enable the reader to reproduce the
exact conditions of the original study. A rather extensive explanation should be provided so that
readers understand why and how you are going to do the research (in a final report). Your
procedures should answer questions or test hypotheses as efficiently, economically and validly
as possible.
SECTIONS
The sections of research design, subject selection, outcome measures, conditions of
testing, treatments and data analyses will encompass most methodological activities that
need to be described. Each section will be described separately.
Research Design
4
Describe the type of research to be conducted, i.e., survey, ex post facto, quasi-
experimental, etc. This section is utilized to describe how you will set up your study to
observe the hypothesized relationship. Describe the steps you will take to address the
hypotheses in operational terms.
Describe what intervening variables might affect the dependent variable(s) other than the
independent variable, i.e.:
- Analyze the internal validity of the study (discussed later in the course)
- Also, discuss threats to external validity (discussed later in the course)
- Describe how your study will measure or control these threats given the "Limitations of
the Study.”
The description of the design for descriptive studies is generally easy to describe, while
the validity is not. Describe non-respondent follow-up procedures and procedures to
compare respondents with non-respondents.
A study may involve more than one purpose. Clearly indicate which design is to address
each objective.
The description of the research design for correlational or ex post facto research is easy
to describe, but particular attention must be directed to alternative or rival explanations
(intervening variables).
The research design for experimental and quasi-experimental research is often quoted
directly from Campbell and Stanley (or others) and analyzed by their threats to validity.
What experimental controls were utilized?
Schematic (graphic) diagrams often aid in understanding the design. Define the symbols
you use.
Subject Selection
The population to be studied is first identified and how a sampling fame (list of elements
in the population) will be developed. Is there frame error? Explain why this population is
appropriate for this study. Note any discrepancies between e experimentally accessible
population and the target population.
The sampling procedure is described. Relate how the sample was selected and your
reasons for selecting any stratifying variables, if they were employed. Describe the sampling
plan.
Describe the size of the sample, and how it was determined and the rationale for the size.
Sampling units should be identified.
Data describing the characteristics of the subjects that are relevant to the study should
be provided; and, if available, data from the population to enable the reader to judge the
representativeness of the sample.
Describe what will be done with subjects that decline to participate, drop out, or do not
participate in all parts of the study. What will be done about non-respondents? What will be
done about non-residents? What will be done about incomplete questionnaires or ones with
obvious response sets, lying, cheating or unanswered items? All affect the population to
whom one can generalize the results, i.e., the external validity of the study.
5
Outcome Measures
Measurement of the dependent variable(s) is one key to your study. Instruments are
operational definitive for variables. Techniques or instruments used to measure the
dependent variable(s), outcome, must be carefully described in terms of:
1. Validity - Does the instrument or technique measure what it purports to measure with
this group?
2. Reliability - Whatever the instrument or technique measures does it do so
consistently with this group?
3. Suitability - Utility must be high for subjects to whom administered.
If well-known instruments are used, one can generally briefly describe them, and their
reliability and validity, and refer the reader through citation to references where more
thorough detailed discussions can be found.
If the researcher is developing the instrumentation, then validity and reliability must be
established. The instrument should be pilot and/or field tested. The researcher should
describe how this was done. A field test can locate potential suitability problem areas.
Appendix copies of the instruments to the proposal.
The Review of Literature can be utilized to verify the concepts/theory under study and the
scope of the measurement methods to assess the concepts. This section should establish
the operational link between these concepts/theory and the measurement.
If you use interviewers or observers, how were they trained? What were their inter-rater
and intra-rater reliabilities?
Conditions of Testing
Describe when, where and under what conditions the data were gathered, the number of
times and order in which instruments were used, and the time allotted for the data collection.
Describe the verbal and written directions provided to the subjects. Were incentives used
to encourage response?
Be specific! When you describe when, taking a test after lunch, after another test, etc.,
may explain variance more than the quarter or date.
During the actual data gathering, testing, monitor events so they can be explained to the
reader.
If instruments are potentially reactive, what precautions will be taken to minimize this
threat.
Treatments
How were the independent variables administered? What was done to the subjects?
Describe all levels so that they are replicable. Were any methods employed and abandoned
because they were valueless?
Kerlinger describes maximizing the differences between the levels of the independent
variable. A typical shortcoming is comparing a "new” methods with a "traditional” or
"conventional” method of doing something, and the researcher describes at length the "new”
6
method but not the "traditional” method. How, really, are they different?
If attribute variables are used in the design, identify them and the number of levels of
each and briefly describe the rationale for the selection of the attribute variables (more
thorough explanation should be in the "Review”).
Data Analysis
Statistical techniques are tools selected because of your design, not vice versa.
Descriptive and inferential analyses are provided to address each facet of the hypothesis,
null hypothesis, objective or problem. Have foresight! What is the easiest way to collect,
code and analyze your data?
Why were these methods of analysis employed? Why was this level of significance
selected?
For each statistical method used, present evidence indicating that the basic assumption
underlying its use have been met. For example, a Pearson Product Moment Correlation (r)
assumes both linearity and homoscedasticity, so you would always need to construct a
scatterplot whenever you use r to show these assumptions are met. Statistics courses
provide you with these skills and understandings.
Remember, select statistics that answer the question(s) involved with the study. They
serve research, not dominate it. Nothing is gained in using complicated statistics that happen
to be in "vogue” if simple ones will do just as well. Specify what analysis will be used for
each objective.
The proposer may find it beneficial to provide, as an appendix, sample skeletons of the
tables and figures that will appear in Chapter 4 as a result of the analysis. Proposal readers,
committee members, etc., often find this beneficial in conceptualizing what will be produced
by these analysis techniques.
Proposals submitted for Agr Educ 885 do not have to have the Data Analysis section
complete. Agr Educ 887 will approach this topic in more detail.
This work is taken from Agr. Educ. 885 class notes provided and written by Dr. Larry Miller, The Ohio State
University.
September 20, 2000
klg
7
