Fillable Printable Occupational Safety And Health Policy
Fillable Printable Occupational Safety And Health Policy
Occupational Safety And Health Policy
Page 1 of 9
OCCUPATIONAL SAFETY AND HEALTH POLICY
Topic: Personal Protective Equipment Policy & Procedure
Date: August, 2001
Approved by:
_________________________________________________
Author(s): Cindy Davis, Risk Management; Ed Polluconi, EH&S;
Jeff Fisher, Jack Miller, Dave Myzak, Mike Smith,
Facilities Management Safety Committee PPE Task
Force Members
Distribution: Facilities Management Supervisors and Managers;
Facilities Management Safety Committee Members
POLICY STATEMENT
It is the policy of the Facilities Management Department of the
University of Colorado at Boulder to assess workplace hazards and
provide personal protective equipment as required, to protect
employees from work place hazards. This Personal Protective
Equipment Policy and Procedure, based on the Occupational Safety
and Health Act, CFR Part 1910.132-139, Personal Protective
Equipment Standard, is part of the overall occupational safety and
health program for the department. It is the responsibility of all
employees to follow the requirements of this policy and
procedure where they pertain to their respective activities and
job duties
PURPOSE
The purpose of this program is to help employees work safely in their
environments by identifying and assessing workplace hazards,
eliminating or reducing the hazards where feasible through
engineering and administrative controls, then providing for the proper
use of personal protective equipment to further reduce the potential
for exposure to workplace hazards. It requires the participation of
administration, supervisors, and all affected employees to:
• Identify and assess workplace hazards
Page 2 of 9
• Identify, evaluate and assess workplace improvements to reduce
hazards
• Provide personal protective equipment based on hazard
assessment
• Ensure proper use and maintenance of personal protective
equipment
SCOPE
This policy and procedure applies to all Facilities Management
employees whose job requires them to work in an environment where
potential for exposure exists to physical, chemical, radiological, or
mechanical irritants capable of causing injury through absorption,
inhalation or physical contact. It applies to the use of personal
protective equipment for eyes, face, head, extremities, protective
clothing, respiratory protective equipment, and hearing protection. The
following procedures are not all inclusive; however the use of the
hazard assessment and good judgment will further define
circumstances in which PPE will be necessary for the protection,
health, and safety of employees.
RESPONSIBILITIES
Administrators
Provide financial and administrative support to the supervisors and
employees to ensure the Personal Protective Equipment Policy &
Procedure is effectively communicated and implemented to achieve the
purpose as stated above.
Supervisors
Ensure hazard assessments are conducted for operations within their
operations, provide required personal protective equipment to affected
employees based on hazard assessment, ensure employees receive
required training on proper use of personal protective equipment, and
ensure compliance with the use of equipment by employees under
their supervision.
Employees
Attend required training. Properly use required personal protective
equipment for designated hazardous work exposures. Provide proper
care and maintenance of assigned PPE, and properly dispose of
Page 3 of 9
defective or damaged PPE. Notify supervisor of any concerns regarding
the need for hazard assessments or specific needs for PPE.
Training Manager
Maintain required training records. Work with supervisors to ensure
new employees receive required personal protective equipment
training,
Environmental Health & Safety/ Risk Management
Provide technical support for hazard assessments upon request from
supervisors. Provide assistance with selection of proper personal
protective equipment based on hazard assessments and assist with
providing required training.
TRAINING REQUIREMENTS
All affected employees shall receive instruction on requirements for
personal protective equipment; and proper selection, use and care of
personal protective equipment. Training shall be offered to all affected
employees upon implementation of the policy, then upon initial
assignment to a position requiring the use of personal protective
equipment. Training will include:
• When PPE is necessary;
• What PPE is necessary;
• How to properly wear and adjust PPE;
• Limitations of PPE
• Proper care, maintenance, useful life and disposal of PPE
Retraining will be required whenever
• Changes in the workplace render previous training obsolete;
• Changes in the types of PPE to be used render previous training
obsolete;
• An employee’s knowledge, failure to use, or improper use of PPE
indicates the employee has not retained the required
understanding or skill.
Training records will be retained to document and certify names of
employees trained, date(s) of training, and subject of training.
Page 4 of 9
PROCEDURES
HAZARD ASSESSMENT
Work areas and operations will be assessed to determine if hazards
are present, or are likely to be present that require the use of personal
protective equipment to adequately protect employees. Personal
Protective Equipment will be selected and provided based on the
assessment. See Appendix A for Hazard Assessment Form and
guidelines for hazard assessment.
EYE AND FACE PROTECTION
The type of eye and face protection required is based on the type of
hazard. Safety glasses are the most common form of protective
eyewear; however other types of protection such as goggles and face
shields may also be required based on the hazard assessment. Eye or
face protection is required when employees are exposed to eye or face
hazards from flying particles, molten metal, liquid chemicals, acids or
caustic liquids, chemical gases or vapors, or potentially injurious light
radiation.
Safety Glasses
Safety glasses are required to be worn by all personnel whenever they
perform, observe, or supervise work operations where there is a
reasonable possibility of injury to the eyes that could be prevented by
such protection. Side shields are required when there is a hazard from
flying objects. Safety Glasses are required for the following operations:
• Electrical work
• Soldering
• Working with hand or power tools
• Working in dusty conditions
• Working with chemicals
• Working overhead where particles could fall in eyes
Employees who wear prescription lenses while engaged in operations
that involve eye hazards are required to wear prescription safety
glasses or wear eye protection that can be worn over the prescription
lenses without disturbing the proper position of the prescription lenses
or the protective lenses.
Page 5 of 9
Safety Goggles and Face Shields
When working with hazardous chemicals, goggles with splash proof
vents are required. If there is a danger of splashing, a face shield is
required in addition to the goggles.
Grinding or chipping operations require either impact type goggles or a
face shield. If the hazard warrants, both goggles and a face shield may
be necessary. Face shields provide an additional measure of protection
for the face and eyes when used with safety glasses or goggles.
Safety goggles shall be worn over eyeglasses when the work being
performed requires them.
Specific examples of work operations requiring safety goggles instead
of safety glasses include:
• Drilling, chipping, or operating power saws
• Working where dust and shavings are likely to be generated
• Handling solvents or chemicals
Specific examples of work operations requiring use of face shields
include grinding and string trimming operations.
Welding operations require welding helmets with appropriate filter
lenses. Welder’s helpers and observers are also required to use either
welding goggles or welding helmets during welding operations.
Eye and Face protection equipment shall comply with ANSI Z87.1-
1989 standard, “American National Standard Practice for Occupational
and Educational Eye and face Protection.” All eye and face protection
equipment shall display the ANSI stamp or marker.
HEAD PROTECTION
Hard Hats
Hard hats must be worn whenever employees perform, observe, or
supervise work operations where there is a potential for head injury
from falling objects. The hard hat to be used is a class “B” type due to
working around electricity. Some examples of work operations or
locations requiring a hard hat include:
• Possibility of impact or penetration by stationary, falling, or
flying objects
• Work areas assigned as hard hat areas
• Working in excavations
• Entering or working in utility holes
Page 6 of 9
• Working in confined spaces (steam tunnels).
• Flagging traffic
• Possibility of electrical contact
• Working aloft, such as in aerial lift trucks
• When workers are overhead
• Operating fork lifts
Bicycle Helmets
When a bicycle is ridden during employment hours an approved bicycle
helmet is required.
FOOTWEAR
Employees are required to wear protective footwear when working in
areas where there is a danger of foot injuries due to falling or rolling
objects or objects piercing the shoe.
Boots must have perpendicular heels when working on round rung
ladders.
General considerations for appropriate footwear are:
• Soles and heels of footwear made of material that will resist
penetration and does not create a slipping hazard
• Maintain all footwear n good condition. Footwear that has
deteriorated to the point that it does not provide the required
protection will not be used.
• Never wear shoes made of canvas or other thin materials, soft-
soled, open toed sandals, or similar types of shoes in the work
environment.
• Management is responsible for determining what constitutes
proper footwear in the local environment and assuring that
appropriate footwear is used.
HAND PROTECTION
Work gloves should be worn when hazardous conditions exist that
could case hand injury. Examples include:
• Handling equipment with rough edges
• Using shovels
• Handling jackhammers
• Working with rakes
• Climbing ladders.
Page 7 of 9
Chemical resistant gloves must be worn to protect the hands from
chemical exposure according to the chemical’s material safety data
sheet (MSDS).
WEARING APPAREL
Wear appropriate shirts and long pats that offer protection from work
place hazards.
Do not wear clothing that has loose or surplus material.
Secure long hair out of the way of machinery or other snag hazards.
Never wear scarves and jewelry around power equipment.
RESPIRATORY PROTECTION
Respiratory protection is required when exposure to potentially
hazardous air contaminants, such as vapors from chemicals or paints
Exceed OSHA’s Permissible Exposure Limits (PEL) and cannot be
controlled by engineering methods. Disposable respirators or dust
masks may be worn to protect from nuisance dusts only. Do not use
dust masks for protection from chemical or paint vapors.
Employees are not allowed to wear a respirator unless authorized in
accordance with the University Respiratory Protection Program. Refer
to the EH&S Policy on Respiratory Protection.
In general, authorization requires
• Identification of approved respirators with proper filters for the
hazard presented
• Initial medical evaluation and scheduled program for continued
evaluation
• Fit Test and training by EH&S
HEARING PROTECTION
Hearing protection is required to protect against noise induced hearing
loss from excessive exposure to high noise levels. Sound Levels at 85
decibels or above are considered high noise levels as defined by the
OSHA Hearing Conservation Standard and require the use of hearing
protection.
Page 8 of 9
Always use hearing protection:
• When the work area is excessively noisy, or whenever normal
conversation is not easily understood at a distance of five feet
• If you are working within 20 feet of equipment or work areas
labeled for hearing protection
• When operating a jack hammer
• When operating tractors and power tools in excessively noisy
environments
Note: A separate safety policy on Hearing Conservation defines
specific requirements for hearing protection, based on the
Occupational Health & Safety Standard, 1910.95.
ELECTRICAL PROTECTION
The following equipment is required when necessary and practical
Insulating Gloves
• Check expiration date
• Check inside of gauntlet for sharp particles
• Squeeze rubber gloves to test elasticity
• Pull fingers apart and look for yellow to show through
• Pull gloves inside out and pull fingers apart again, looking for
black to show through
• Turn right side out air up and feel for leaks with cheek
Storing Gloves
• Place cotton liners face to face
• Place rubber gloves with palms facing cotton liners
• Place leather gauntlet gloves with palms facing away from
rubber gloves
• Place gloves in storage bag, insert open end of gloves in bag
first.
• Store bag by hanging gloves in the position so that the glove
fingers will be facing upward so that any moisture will drain from
gloves.
CARE AND MAINTENANCE of PPE
Personal protective equipment must be inspected daily before use and
maintained properly. Equipment that is damaged or excessively worn
should be disposed of.
Page 9 of 9
For eye protection, inspect lenses for scratches and any other
damages. Maintain in good, clean condition. Store in appropriate
location, and replace when damaged.
For hard hats, the hard hat shell should be inspected daily for cracks,
dents, cuts scratches, gouges or abnormal color or pattern. Hard hat
suspension should be inspected daily for signs of wear on all parts,
twisted or frayed straps, cracks or tears on plastic clips. If any part of
a hard hat does not pass inspection, replace the shell, suspension or
both.
If a hard hat sustains a hit by an object, or is dropped with enough
force that damage is likely, it should be replaced even though there
may not be visible signs of damage.
Clean both the shell and suspension of the hard hat on a regular basis.
Use mild soap and water only, not petroleum based cleaning agent or
solvent. Cleaning prevents dirt and stains from hiding small cracks or
flaws.
Employee Owned Equipment
When employees provide their own protective equipment the
supervisor must be informed. Equipment must be assessed to assure
its adequacy, including proper maintenance, and sanitation of such
equipment.
