Login

Fillable Printable Tire Size Conversion Chart

Fillable Printable Tire Size Conversion Chart

Tire Size Conversion Chart

Tire Size Conversion Chart

5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 1 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
San Jose Classic Chevys Club Tire Tech - Tire Size Conversion Chart
[SJCCC Home | Spotters Guide | Events Calendar | Cruise Night Events | Toy Drive & Car Show | Links
Page | Message Board | Photo Galleries | Technical Info | Newsletters]
Sidewall Markings
There is a lot of information on the sidewall of a tire. Typically, you'll find UTQG ratings for treadwear,
traction and temperature, the size of the tire, the load rating index number with a speed rating index, the
construction type (bias or radial), the D.O.T. (Dept. of Transportation) compliance code, construction
details, and of course, the make and model of the tire. On some tires used as original equipment, you may
also find a marking that indicates its OE status. Porsche uses an N-0 or N-1 designation, BMW uses a star
on some O.E. tires and General Motors uses a "TPC" code. Light Truck tires are sometimes marked with an
LT for "Light Truck" before the size, passenger tires are often marked with the letter P for "Passenger"
before the size. Passenger tires of the same size with or without the P are virtually interchangable.
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 2 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
UTQG Ratings
The Department of Transportation requires each manufacturer to grade its tires under the Uniform Tire
Quality Grade (UTQG) labeling system and establish ratings for treadwear, traction, and temperature
resistance. These tests are conducted independently by each manufacturer following government guidelines
to assign values that represent a comparison between the tested tire and a control tire. While traction and
temperature resistance ratings are specific performance levels, the treadwear ratings are assigned by the
manufacturers following field testing and are most accurate when comparing tires of the same brand.
Treadwear
Treadwear receives a comparative rating based on wear rate of the the tire in field testing following a
government specified course. For example, a tire grade of 150 wears 1.5 times as long as a tire graded 100.
Actual performance of the tire can vary significantly depending on conditions, driving habits, care, road
characteristics, and climate.
Traction
Straight-a-head wet braking traction has been represented by a grade of A, B, or C with A being the
highest. In 1997 a new top rating of "AA" has been introduced to indicate even greater wet braking traction.
However, due to its newness, this grade will probably be applied initially to new tire lines as they are
introduced and later to existing lines which excel in wet braking, but had been limited to the previous top
grade of "A". Traction grades do not indicate wet cornering ability.
Temperature
Temperature resistance is graded A, B or C. It represents the tire's resistance to the heat generated by
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 3 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
running at high speed. Grade C is the minimum level of performance for all passenger car tires as set under
Federal Motor Vehicle Safety Standards. This grade is established for a tire that is properly inflated and not
overloaded.
Note: UTQG ratings are not required on winter and light truck sized tires.
Calculating Tire Dimensions
Modern metric tire dimensions Example...185/60R14 85H or 185/60HR14
The first number is the width of the tire in millimeters, measured from sidewall to sidewall. To convert to
inches, divide by 25.4 In the example above, the width is 185mm or 7.28".
The second number is the aspect ratio. This is a ratio of sidewall height to width. In the example above, the
tire is 7.28" wide, multiply that by the aspect ratio to find the height of one sidewall. In this case,
185x0.60=111mm or 7.28"x0.60=4.36".
The last number is the diameter of the wheel in inches.
To figure the outside diameter of a tire, take the sidewall height and multiply by 2,(remember that the
diameter is made up of 2 sidewalls, the one above the wheel, and the one below the wheel) and add the
diameter of the wheel to get your answer.
Example...185/60R14 85H or 185/60HR14
185mm x .60=111mm x 2=222mm + 355.6mm(14")= 577.6mm or 22.74"
Tire Size Conversion Chart
While today's P-metric passenger tire sizes have existed since the early 1980's, restoring classic muscle cars
and ponycars has kept yesterday's Numeric and Alpha Numeric tires from disappearing. The chart below is
intended to help you determine their equivalent P-metric tire sizes.
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 4 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
Two versions of numeric tire sizes were used as original equipment on vehicles between 1949 and 1970.
The early numeric tires had the equivalent of a 90-series aspect ratio, while later tires offered a "lower"
profile equivalent to a 80-series. These tires typically featured tread widths ranging from 3.5" for the
smallest 13" rim diameter tires to about 5.5" for the largest 15" rim diameter tires.
To convert Numeric sizes to today's P-metric sizes, it is important to remember that early cars were not only
equipped with narrow tires, they were equipped with narrow wheels as well. In most cases, numeric tires
should be replaced with today's 80- or 75-series sized tires. This is especially important if the original
wheels are to be used. Today's lower profile sizes will usually result in too wide a tire with too much gap
between the wheel well opening and the top of the tire.
For example: The 1965 Ford Mustang's 6.95-14 would be replaced with a P185/75R14.
Tire Size Overall Diameter Section Width Load Capacity
6.95-14 25.3" 7.0" 1230 lbs @ 32 psi
P185/75R14 25.0" 7.2" 1290 lbs @ 35 psi
Alpha numeric tire sizes were introduced as original equipment in the late 60's and became widely used in
the early 70's. These tires were identified with a letter which indicated the tire's load capacity, followed by a
"R" if radial ply construction, the tire's aspect ratio and wheel diameter. So while G78-15 (28.01"), G70-15
(27.5") and G60-15 (26.4") sized tires are all rated to carry the same load, their different aspect ratios
resulted in tires with the overall diameters indicated above.
To convert Alpha Numeric tires to P-metric sized tires, it is important to identify the original tire's aspect
ratio. The 78-series Alpha Numeric tires should be replaced with today's 80-, or 75 series tires. If the
vehicle was equipped with the low profile 70-, 60- or 50-series sizes, the P-metric substitution should be
selected from the P-metric size column that offers the equivalent aspect ratio as the existing tire.
For example: The 1970 Chevrolet Camaro Z-28 F60-15 would be replaced with a P235/60R15 (selected
from the P-metric 60-series column).
Tire Size Overall Diameter Section Width Load Capacity
F60-15 25.9" 9.2" 1500 lbs @ 32 psi
P235/60R15 26.1 9.5" 1642 lbs @ 35 psi
1949
to
1964
1965
to
1970
1970 to
1980 1980 - On
NUMERIC
ALPHA
NUMERIC EUROMETRIC P-METRIC EUROMETRIC or P-METRIC
"90" to
"80"-Series
78 to 50-
Series "82"-Series
80-, 75-
series 70-series 65-series 60-series 50-series
145R10 165/70R10
145R12 P145/80R12 165/70R12
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 5 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
6.00-
12 155R12 P155/80R12
165/65R13
145R13
155R13 P155/80R13 175/70R13 195/60R13 215/50R13
5.60-
13
6.00-
13 A 165R13 P165/80R13 185/70R13 205/60R13
6.50-
13 B 175R13 P175/80R13
C P185/80R13
7.00-
13 D 185R13
195R13
175/65R14
6.00-
14
6.45-
14 155R14 175/70R14 185/65R14
B 165R14 P175/75R14 185/70R14 195/65R14 205/60R14
6.50-
14
6.95-
14 C 175R14 P185/75R14 195/70R14 215/60R14
D
7.00-
14
7.35-
14 E 185R14 P195/75R14 205/70R14 225/60R14 245/50R14
7.50-
14
7.75-
14 F 195R14 P205/75R14 215/70R14 235/60R14
8.00-
14
8.25-
14 G 205R14 P215/75R14 225/70R14 245/60R14 265/50R14
8.50-
14
8.55-
14 H 215R14 P225/75R14
9.00-
14 J 225R14
9.50-
14 L
5.60-
15 A 155R15 P155/80R15 185/65R15 195/60R15
6.00-
15 B 165R15 P165/80R15 185/70R15 195/65R15 205/60R15 225/50R15
6.50-
15
6.85-
15 C 175R15 195/70R15 205/65R15 215/60R15
D
7.35-
15 E 185R15 P195/75R15 205/70R15 215/65R15 225/60R15
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 6 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
6.70-
15
7.75-
15 F 195R15 P205/75R15 215/70R15 235/60R15
8.15-
15
7.10-
15 G 205R15 P215/75R15 225/70R15 235/65R15 245/60R15 265/50R15
8.25-
15
8.45-
15
7.60-
15 H 215R15 P225/75R15 235/70R15 255/60R15 275/50R15
8.55-
15
8.00-
15
8.85-
15 J 225R15 P225/75R15 235/70R15 265/60R15
8.20-
15
9.00-
15 K
9.15-
15 L 235R15 P235/75R15 255/70R15 275/60R15 295/50R15
N 305/50R15
Listing in chart does not
imply complete
interchangeability.
When changing tire sizes, dimensional clearances must be
checked.
Each row of the above chart is roughly the same diameter tires, but the width varies by column, and the
diameters are not exact matches.
Diameter Comparison
While this chart certainly doesn't guarantee a specific tire will fit your vehicle, it can give you an idea of the
tire sizes with the same diameter.
Approx.
Tire
Diameter P-metric and European Metric LT-metric Light Truck Light Truck
(in
Inches)
75-series
and Higher
70- and 65-
series
60-series
and Lower
85-series 75-series and
Lower
Flotation Numeric
34 1/2 35X12.50R15LT
33 1/2 LT255/85R16
33 LT285/75R16
32 1/2
33X12.50R16.5LT
33X12.50R15LT
31 1/2 P275/70R16 LT235/85R16 LT265/75R16 32X11.50R15LT 7.50R16
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 7 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
30 1/2
P265/75R15 265/70R16 285/60R17 LT215/85R16 LT285/60R17 31X10.50R16.5LT 9.50R16.5LT
LT245/75R16 31X11.50R15LT
LT325/60R15 31X10.50R15LT
30 P255/70R16 P275/60R17
29 1/2
P245/70R16 265/60R17 LT225/75R16 30X9.50R15LT 8.75R16.5LT
7.00R15
29
205R16 255/65R16 255/55R18 LT235/75R15
205/80R16 P235/70R16 255/60R17
P235/75R15 P255/70R15
28 1/2
P225/75R15 P225/70R16 LT225/75R15 29X9.50R15LT 8.00R16.5LT
P245/70R15
28 215/70R16
P255/55R17
P275/60R15
27 1/2 P215/75R15 P225/70R15 LT215/75R15
27
P205/75R15 P215/65R16 255/50R17 LT205/75R15
P305/50R15
P255/60R15
26 1/2
P195/75R15 P225/70R14 P295/50R15 LT195/75R15 27X8.50R14LT
P245/60R15
26
P205/75R14 P215/65R15 P235/60R15
185R14 P215/70R14
25 1/2 P195/75R14 P205/70R14 P225/60R15
P-Metric and Euro Metric Sizing
What's the difference between the tire sizes of P225/60R16 and 225/60R16? The obvious answer is the "P"
in front of the first size, but just what does the "P" stand for and what does it tell us about the tires?
P-metric sized tires are the ones with the "P" at the beginning of the tire size, (such as P225/60R16 listed
above). They were introduced in the United States in the late 70s and are installed on vehicles primarily
used to carry passengers including cars, station wagons, sport utility vehicles and even light duty pickup
trucks. Their load capacity is based on an engineering formula which takes into account their physical size
(the volume of space for air inside the tire) and the amount of air pressure (how tightly the air molecules are
compressed). Since all P-metric sizes are all based on the formula for load, vehicle manufacturers can design
their new vehicles (weights and wheel well dimensions) around either existing or new tire sizes.
Metric or Euro metric sized tires are the ones without the "P" at the beginning, (such as 185R14 or the
225/60R16 listed above). Using metric dimensions to reflect a tire's width actually began in Europe in the
late 60s. However, since Euro metric sizes have been added over time based on the load and dimensional
requirements of new vehicles, the tire manufacturers designed many new tire sizes and load capacities
around the needs of new vehicles. Not quite as uniform as creating sizes using a formula, but they got the
job done.
5/31/10 1:08 PMTire Tech - Tire Size Conversion Chart
Page 8 of 8http://clubs.hemmings.com/clubsites/chevylist/tech/tire_size_conversion.htm
Euro metric and P-metric tires in the same size (i.e. P225/60R16 & 225/60R16) are equivalent in their
dimensions with just slight differences in their load capacity calculations and inflation pressure tables. So if
Euro metric and P-metric tires have the same numeric size, the same tire performance category and the same
speed rating, the two are considered equivalent and interchangeable if used in axle pairs or sets of four.
Simply continue to follow your vehicle manufacturer's recommended inflation pressures provided in the
vehicle's owner's manual or on the vehicle tire placard (usually found on the door jamb or on the glove box
or counsel door) for either size tire.
The format, and possibly the content of this article has been modified.
Special Thanks to The Tire Rack for this article.
Login to HandyPDF
Tips: Editig or filling the file you need via PC is much more easier!
By logging in, you indicate that you have read and agree our Terms and Privacy Policy.